All Pro Roofing & Designers


Dallas 972.721.9274

Fort Worth 817.571.9274

“Not your ordinary roofer”

Insurance Replacement Roof Specialists

Dallas | Fort Worth | Denver | Miami | Chicago | Houston | Austin

Commercial Roofing

A flat roof is a type of covering for a building. In contrast to the more sloped form of roof, a flat roof is horizontal or nearly horizontal. The slope of a roof is properly known as its pitch: Roofs which are nearly flat are known as low-pitch roofs.

Modified Torch Down

Torch Down Applied Modified Bitumen is a non-oxidized (flux) asphalt, blended with various thermoplastic atactic polypropylene polymers and co-polymers.  Non-woven polyester mat which is impregnated and coated with a superior grade, modified bitumen compound.

Hot Mopped Applied

Hot Mop Applied Modified Bitumen is a hot asphalt applied, mineral surfaced, modified bitumen waterproofing membrane composed of carefully selected asphalts (bitumen) having superior modifying characteristics, blended with high quality styrene-butadiene-styrene rubber. Reinforced with a high-strength fiberglass mat.

TPO

Thermoplastic polyolefin (TPO) single-ply roofing membranes are among the fastest growing commercial roofing products and have gained broad industry acceptance for their many performance and installation advantages.  As demand increases for heat-reflective and energy efficient roofing systems, TPO single-ply roofing membranes continue to provide exceptional resistance to ultraviolet, ozone and chemical exposure.

EpoxyFlex

EpoxyFlex is a highly specialized coating developed to provide the best protection possible from water penetration, rust intrusion, fat and grease damage and resistance to most acids. Some of the biggest companies in the world use EpoxyFlex to protect their Factories, Warehouses, Hotels, Shopping Malls, Marinas, Tractor-Trailers, Pipelines and even Swimming Pools against the ravages of heat, cold, sun, water, storms, acid rain and more.

Copyright 2013 - 2016 - All Pro Roofing & Designers

EPDM

An EPDM roof is a single-ply rubber membrane ranging from about 45 to 60mm in thickness. It is sold in rolls that can be as wide as 50 feet, though many rubber roofs require much narrower EPDM materials. The most common EPDM materials provide a smooth black finish, though some have pigments or dyes added to create a white finish. This white finish helps the roof to reflect the sun's rays and keep the inside of the building cooler.

Standing Seam

This type of roofing is made out of interlocking metal panels that are crimped together on-site. Panels and seams run vertically from the top of the ridge down to the bottom of the roof. Seams are crimped in a fashion where they are raised to prevent water from seeping between them and to encourage efficient water run-off. Panels can flex at the seams to compensate for temperature change.